Plastic Push-In

BULKHEAD 10MM
BULKHEAD 10MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

BULKHEAD 6MM
BULKHEAD 6MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 1/2
ELBOW CONNECTOR 1/2

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 10MM
ELBOW CONNECTOR 10MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 12MM
ELBOW CONNECTOR 12MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 15MM
ELBOW CONNECTOR 15MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 18MM
ELBOW CONNECTOR 18MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 22MM
ELBOW CONNECTOR 22MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 28MM
ELBOW CONNECTOR 28MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 5MM
ELBOW CONNECTOR 5MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 6MM
ELBOW CONNECTOR 6MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

ELBOW CONNECTOR 8MM
ELBOW CONNECTOR 8MM

This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.