TEE SIDE SWIVEL 1/4BSP – 8MM
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.
TEE SIDE SWIVEL 1/8BSP – 6MM
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.
TEE SIDE SWIVEL 1/8BSP – 8MM
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.
TEE STUD M12X1.5 – 6X1MM PUSH-IN
WIRA Push-In fittings are designed to be quick and easy to use. After undergoing strenuous testing, they gained the German TUV approval for vehicle braking systems.
TEE STUD M12X1.5 – 8X1MM PUSH-IN
WIRA Push-In fittings are designed to be quick and easy to use. After undergoing strenuous testing, they gained the German TUV approval for vehicle braking systems.
TEE STUD M16X1.5 – 10MM PK1
This item is a blister pack for retail use!
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
TEE STUD M16X1.5 – 10MM PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
TEE STUD M16X1.5 – 10X1.25MM PUSH-IN
WIRA Push-In fittings are designed to be quick and easy to use. After undergoing strenuous testing, they gained the German TUV approval for vehicle braking systems.
TEE STUD M16X1.5 – 10X1.5MM
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-183
TEE STUD M16X1.5 – 10X1.5MM PK1
This item is a blister pack for retail use!
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-121
TEE STUD M16X1.5 – 10X1MM
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-182
TEE STUD M16X1.5 – 12MM PK1
This item is a blister pack for retail use!
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.