SOFT COPPER 1/4OD 25FT COIL
This copper pipe has a 0.71mm wall thickness and can be flared using a flaring tool supplied by Tube Gear. It is very supple and can be used on hydraulics within the maximum working pressures as shown in the catalogue. All coils are 25ft.
SOFT COPPER 10MMOD 25FT COIL
This copper pipe has a 0.71mm wall thickness and can be flared using a flaring tool supplied by Tube Gear. It is very supple and can be used on hydraulics within the maximum working pressures as shown in the catalogue. All coils are 25ft.
SOFT COPPER 12MMOD 10MTR COIL
This copper pipe has a 0.71mm wall thickness and can be flared using a flaring tool supplied by Tube Gear. It is very supple and can be used on hydraulics within the maximum working pressures as shown in the catalogue. All coils are 25ft.
SOFT COPPER 3/16OD 25FT COIL
This copper pipe has a 0.71mm wall thickness and can be flared using a flaring tool supplied by Tube Gear. It is very supple and can be used on hydraulics within the maximum working pressures as shown in the catalogue. All coils are 25ft.
SOFT COPPER 3/8OD 25FT COIL
This copper pipe has a 0.71mm wall thickness and can be flared using a flaring tool supplied by Tube Gear. It is very supple and can be used on hydraulics within the maximum working pressures as shown in the catalogue. All coils are 25ft.
SOFT COPPER 4MMOD 25FT COIL
This copper pipe has a 0.71mm wall thickness and can be flared using a flaring tool supplied by Tube Gear. It is very supple and can be used on hydraulics within the maximum working pressures as shown in the catalogue. All coils are 25ft.
SOFT COPPER 5/16 OD 25FT COIL
This copper pipe has a 0.71mm wall thickness and can be flared using a flaring tool supplied by Tube Gear. It is very supple and can be used on hydraulics within the maximum working pressures as shown in the catalogue. All coils are 25ft.
SOFT COPPER 6MM OD 25FT COIL
This copper pipe has a 0.71mm wall thickness and can be flared using a flaring tool supplied by Tube Gear. It is very supple and can be used on hydraulics within the maximum working pressures as shown in the catalogue. All coils are 25ft.
SOFT COPPER 8MMOD 25FT COIL
This copper pipe has a 0.71mm wall thickness and can be flared using a flaring tool supplied by Tube Gear. It is very supple and can be used on hydraulics within the maximum working pressures as shown in the catalogue. All coils are 25ft.
TEE FEMALE M12X1
Steel Brake Pipe Nuts suitable for metric or Imperial break pipe as stated in sizing.
UNICOIL (3 METER) M18X1.5 – M18X1.5 FEMALE THREAD RED TAIL
This unicoil has a working length of 3m.
These coils are manufactured out of Super Polyurethane instead of standard Polyamid. Polyamid 11-12, a special compound of polyurethane has large advantages, such as:
- very good recovery from kinking
- Longer working lengths
- high tensile elasticity
- better resistance against oil, petrol, ozone and UV
- high flexibility at low temperatures
- very good abrasion and rupture resistance
These unicoils operate within a temperature range of -40°C up to 70°C. They have a working pressure of 10 BAR and burst pressure of 42 BAR at 20°C. Tested by TUV Germany according to: ISO 7375/2 198, ISO 7628/2 1998, DIN 73378/02 ’96, DIN 74310-2/12 ’93, DIN 74323/04 ’91 and DIN 74324/02 ’96.
UNICOIL (3 METER) M18X1.5 – M18X1.5 FEMALE THREAD YELLOW TAIL
This unicoil has a working length of 3m.
These coils are manufactured out of Super Polyurethane instead of standard Polyamid. Polyamid 11-12, a special compound of polyurethane has large advantages, such as:
- very good recovery from kinking
- Longer working lengths
- high tensile elasticity
- better resistance against oil, petrol, ozone and UV
- high flexibility at low temperatures
- very good abrasion and rupture resistance
These unicoils operate within a temperature range of -40°C up to 70°C. They have a working pressure of 10 BAR and burst pressure of 42 BAR at 20°C. Tested by TUV Germany according to: ISO 7375/2 198, ISO 7628/2 1998, DIN 73378/02 ’96, DIN 74310-2/12 ’93, DIN 74323/04 ’91 and DIN 74324/02 ’96.