Push In Air Brake

10MM TUBE RELEASE TOOL PK1
10MM TUBE RELEASE TOOL PK1

This item is a blister pack for retail use!
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-152

Read more
12MM TUBE RELEASE TOOL PK1
12MM TUBE RELEASE TOOL PK1

This item is a blister pack for retail use!
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-153

Read more
15MM TUBE RELEASE TOOL PK1
15MM TUBE RELEASE TOOL PK1

This item is a blister pack for retail use!
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-154

Read more
3 WAY COUPLING BODY REGULAR
3 WAY COUPLING BODY REGULAR

A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.

Read more
4 WAY COUPLING BODY REGULAR
4 WAY COUPLING BODY REGULAR

A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.

Read more
6MM PLUG PK3
6MM PLUG PK3

This item is a blister pack for retail use!
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.

Read more
6MM TUBE RELEASE TOOL PK1
6MM TUBE RELEASE TOOL PK1

This item is a blister pack for retail use!
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-150

Read more
8MM TUBE RELEASE TOOL PK1
8MM TUBE RELEASE TOOL PK1

This item is a blister pack for retail use!
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-151

Read more
ADAPTOR M16X1.5 – M18X1.5 (24DEGREE CONE)
ADAPTOR M16X1.5 – M18X1.5 (24DEGREE CONE)

Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.

Read more
ADAPTOR MALE M10x1.0 – M10x1.0 BRASS
ADAPTOR MALE M10x1.0 – M10x1.0 BRASS

Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.

Read more
ADAPTOR MALE/FEMALE 1/4NPT – M12X1.5
ADAPTOR MALE/FEMALE 1/4NPT – M12X1.5

Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.

Read more
ADAPTOR MALE/FEMALE 1/4NPT – M12X1.5 PK1
ADAPTOR MALE/FEMALE 1/4NPT – M12X1.5 PK1

This item is a blister pack for retail use!
Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.

Read more