AIR SEAL NG8 232 7X1.5 O-RING
Voss Quick connections made of brass or plastic, valves, multi-connectors and manifolds, for the fir-tree connection of polyamide tubes in compressed air systems for commercial vehicles
ANTI ROTATION RING – CAMOZZI
| Size | Part No. |
|---|---|
| 22mm | CC7420 |
For Camozzi C1 Swivel Connectors, please install manually as per the instructions in our catalogue. Please note Swivel Connectors should not be used in applications with relative movement (e.g connections between truck and trailer or between axle and chassis)
ASSEMBLY UNIT M10X1 – 6X1MM 230
Voss Quick connections made of brass or plastic, valves, multi-connectors and manifolds, for the fir-tree connection of polyamide tubes in compressed air systems for commercial vehicles
ASSORTED BOX PRO RELEASE TOOL
Kit Contents:
[table “” not found /]Please note that all kit boxes are subject to change and are only guaranteed correct to the listing as per the time of print. If you wish to check the box contents, please contact the Sales team who will be happy to supply you with an up to date contents list of any items.
BLANKING PLUG – CAMOZZI
| Thread | Part No. |
|---|---|
| M12 x 1.5 | 7621SB |
| M16 x 1.5 | 7622SB |
| M22 x 1.5 | 7623SB |
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-181
BLANKING PLUG – RAUFOSS
| Tube | Type | Part No. |
|---|---|---|
| 6mm | Regular | R040106 |
| 8mm | Regular | R040108 |
| 12mm | Regular | R040112 |
A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.
BULKHEAD 10MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
BULKHEAD 10MM
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.
BULKHEAD 4MM
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.
BULKHEAD 6MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
BULKHEAD 6MM
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.
BULKHEAD 8MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range 0c to +60c.