BULKHEAD 8MM
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.
BULKHEAD ADAPT MALE/FEMALE M18X1.5 – M16X1.5 PK1
This item is a blister pack for retail use!
Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.
BULKHEAD ADAPTOR MALE/FEMALE (LONG) – RAUFOSS
| Male Thread | Female Thread | Part No. | Pkt No. | Pkt Qty. |
|---|---|---|---|---|
| M16 x 1.5 | M16 x 1.5 | 4613 | RA613 | 1 |
Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.
BULKHEAD ADAPTOR SWIVEL – RAUFOSS
| Type | Thread A | Thread B | Part No. |
|---|---|---|---|
| Regular | M16 x 1.5 | M22 x 1.5 | R17021622 |
| Regular | M22 x 1.5 | M22 x 1.5 | R17022222 |
A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.
BULKHEAD ADAPTOR WITH LOCKNUT & O-RING
| Thread A | Thread B | Thread C | Part No | Pkt No |
|---|---|---|---|---|
| M22 x 1.5 | M22 x 1.5 | M16 x 1.5 | 4499 | RA499 |
| M16 x 1.5 | M22 x 1.5 | M16 x 1.5 | 4631 | RA631 |
| M22 x 1.5 | M16 x 1.5 | M10 x 1 | 4494 |
Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.
BULKHEAD CONNECTOR 1/2 PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
BULKHEAD CONNECTOR 10MM PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
BULKHEAD CONNECTOR 12MM PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
BULKHEAD CONNECTOR 12X1.5MM PUSH-IN
WIRA Push-In fittings are designed to be quick and easy to use. After undergoing strenuous testing, they gained the German TUV approval for vehicle braking systems.
BULKHEAD CONNECTOR 12X1.5MM SHORT END PUSH-IN
WIRA Push-In fittings are designed to be quick and easy to use. After undergoing strenuous testing, they gained the German TUV approval for vehicle braking systems.
BULKHEAD CONNECTOR 3/8 PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
BULKHEAD CONNECTOR 6MM PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.