TEE CONN 12MM-6MM PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
TEE CONNECTOR – CAMOZZI
| Tube OD | Part No | Pkt No. | Pkt Qty. |
|---|---|---|---|
| 6 x 1mm | CC6517 | CAM317 | 1 |
| 8 x 1mm | CC6519 | CAM319 | 1 |
| 10 x 1mm | CC6521 | CAM321 | 1 |
| 10 X 1.5mm | CC6521.5 | CAM321.5 | 1 |
| 12 x 1.5mm | CC6523 | CAM323 | 1 |
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-156
TEE CONNECTOR – RAUFOSS
| Tube Size | Body Type | Part No. |
|---|---|---|
| 6 x 1 | Regular | R52000600 |
| 8 x 1 | Regular | R52000800 |
| 10 x 1 | Regular | R520010001 |
| 10 x 1.25 | Regular | R520010002 |
| 10 x 1.5 | Regular | R520010005 |
| 12 x 1.5 | Regular | R52001200 |
| 15 x 1.5 | Heavy Duty | R53001500 |
| 16 x 2 | Heavy Duty | R53001600 |
A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.
TEE CONNECTOR 1/2
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range 0c to +60c.
TEE CONNECTOR 1/2 PK1
This item is a blister pack for retail use!
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
TEE CONNECTOR 1/2 PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
TEE CONNECTOR 1/4
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.
TEE CONNECTOR 1/4
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range 0c to +60c.
TEE CONNECTOR 1/4 PK2
This item is a blister pack for retail use!
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
TEE CONNECTOR 1/4 PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
TEE CONNECTOR 10MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
TEE CONNECTOR 10MM
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.