STRAIGHT STUD M16X1.5 – 10X1MM
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-137
Related Products
STRAIGHT CONNECTOR 3/8
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 10MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 3/16
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
JOHN GUEST COLLET RELEASE TOOL
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 18MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 10MM-8MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 5/16
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 1/2
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.