STEPPED OLIVE 8MM PK15
This item is a blister pack for retail use!
Brass Compression Fitting designed to be used in conjunction with copper, nylon or polythene tube.
STEPPED OLIVE 9MM
Brass Compression Fitting designed to be used in conjunction with copper, nylon or polythene tube.
STEPPED OLIVE 9MM PK12
This item is a blister pack for retail use!
Brass Compression Fitting designed to be used in conjunction with copper, nylon or polythene tube.
STEPPED OLIVE5/16
Brass Compression Fitting designed to be used in conjunction with copper, nylon or polythene tube.
Stock Package Service
A short informational leaflet on the stock package service provided by Tube Gear Limited
STRAGHT STUD 3/8NPT – 12MM
A full range of fittings and components that cover all metric air brake applications. Any parts listed with a T suffix denotes that it comes pre-fitted with a Thrust Ring and O-Ring.
STRAIGHT CONN 13MM
Brass Compression Fitting designed to be used in conjunction with copper, nylon or polythene tube.
STRAIGHT CONNECTOR – CAMOZZI
| Tube | Part No. | Pkt No. | Pkt Qty. |
|---|---|---|---|
| 6 x 1mm | CC6502 | CAM302 | 2 |
| 8 x 1mm | CC6504 | CAM304 | 1 |
| 10 x 1mm | CC6506 | CAM306 | 1 |
| 10x1.25mm | CC6506.25 | CAM306.25 | 1 |
| 10 x 1.5mm | CC6506.5 | CAM306.5 | 1 |
| 12 x 1.5mm | CC6508 | CAM308 | 1 |
| 15 x 1.5mm | CC6511 | CAM311 | 1 |
| 16 x 2mm | CC6512 | CAM312 | 1 |
| 18 x 2mm | CC6509 | N/A | N/A |
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-150
STRAIGHT CONNECTOR – RAUFOSS
| Tube | Part No. | Pack No. |
|---|---|---|
| 6 x 1 | 4566C | RA780 |
| 8 x 1 | 4567C | RA781 |
| 10 x 1 | 4568C | RA782 |
| 10 x 1.25 | 4569C | RA783 |
| 10 x 1.5 | 4570C | RA784 |
| 12 x 1.5 | 4571C | RA785 |
| 15 x 1.5 | 4572C |
A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.
STRAIGHT CONNECTOR 1/2
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range 0c to +60c.
STRAIGHT CONNECTOR 1/2
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 1/2
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.