BULKHEAD 8MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range 0c to +60c.
BULKHEAD 8MM
This range of nickel plated brass push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids in industrial applications. Maximum working pressure is 18 Bar with a Temperature range -30c to +80c.
BULKHEAD ADAPT MALE/FEMALE M18X1.5 – M16X1.5 PK1
This item is a blister pack for retail use!
Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.
BULKHEAD ADAPTOR MALE/FEMALE (LONG) – RAUFOSS
| Male Thread | Female Thread | Part No. | Pkt No. | Pkt Qty. |
|---|---|---|---|---|
| M16 x 1.5 | M16 x 1.5 | 4613 | RA613 | 1 |
Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.
BULKHEAD ADAPTOR SWIVEL – RAUFOSS
| Type | Thread A | Thread B | Part No. |
|---|---|---|---|
| Regular | M16 x 1.5 | M22 x 1.5 | R17021622 |
| Regular | M22 x 1.5 | M22 x 1.5 | R17022222 |
A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.
BULKHEAD ADAPTOR WITH LOCKNUT & O-RING
| Thread A | Thread B | Thread C | Part No | Pkt No |
|---|---|---|---|---|
| M22 x 1.5 | M22 x 1.5 | M16 x 1.5 | 4499 | RA499 |
| M16 x 1.5 | M22 x 1.5 | M16 x 1.5 | 4631 | RA631 |
| M22 x 1.5 | M16 x 1.5 | M10 x 1 | 4494 |
Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.
BULKHEAD CONNECTOR 1/2 PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
BULKHEAD CONNECTOR 1/2BSP – M22X1.5
A full range of fittings and components that cover all metric air brake applications. Any parts listed with a T suffix denotes that it comes pre-fitted with a Thrust Ring and O-Ring.
BULKHEAD CONNECTOR 10MM OD
A full range of fittings and components that cover all metric air brake applications. Any parts listed with a T suffix denotes that it comes pre-fitted with a Thrust Ring and O-Ring.
BULKHEAD CONNECTOR 10MM PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
BULKHEAD CONNECTOR 12MM OD
A full range of fittings and components that cover all metric air brake applications. Any parts listed with a T suffix denotes that it comes pre-fitted with a Thrust Ring and O-Ring.
BULKHEAD CONNECTOR 12MM PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.