TEE CONNECTOR UNEQUAL 12X1.5MM – 8X1MM PUSH-IN
WIRA Push-In fittings are designed to be quick and easy to use. After undergoing strenuous testing, they gained the German TUV approval for vehicle braking systems.
TEE CONNECTOR UNEQUAL 22MM-15MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
TEE CONNECTOR UNEQUAL 9X1.5MM – 8X1MM PUSH-IN
WIRA Push-In fittings are designed to be quick and easy to use. After undergoing strenuous testing, they gained the German TUV approval for vehicle braking systems.
TEE COUPLING BODY – RAUFOSS
| Type | Part No. | Pkt No. | Pkt Qty. |
|---|---|---|---|
| Small | R51000000 | ||
| Regular | R52000000 | RA754 | 1 |
| Heavy Duty | R53000000 |
A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.
TEE FEMALE – CAMOZZI
| Thread | Part No. | Pkt No. | Pkt Qty. |
|---|---|---|---|
| M22 x 1.5 | CC4595 | CAM595 | 1 |
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-98
TEE FEMALE – RAUFOSS
| Thread Size | Part No | Pkt No | Pkt Qty. |
|---|---|---|---|
| M12 x 1.5 | 4593 | RA593 | 1 |
| M16 x 1.5 | 4594 | RA594 | 1 |
| M22 x 1.5 | 4595 | RA595 | 1 |
Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.
TEE FEMALE W/ MALE SIDE STUD – RAUFOSS
| Male Thread | Female Thread | Part No. |
|---|---|---|
| M16 x 1.5 | M16 x 1.5 | 4651 |
| M16 x 1.5 (W/ Locknut & O-Ring) | M16 x 1.5 | 4661 |
| M22 x 1.5 | M16 x 1.5 | 4652 |
Raufoss’ brass fitting programme is a unique and simple method of using building block fittings and pipe to outfit a truck or trailer.
TEE MALE BRANCH ADAPT M12X1.5
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
TEE MALE BRANCH ADAPT M16X1.5
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
TEE MALE BRANCH ADAPT M22X1.5
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
TEE MALE SIDE ADAPT M16X1.5
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
TEE MALE SIDE ADAPT M22X1.5
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.