BULKHEAD CONNECTOR M22X1.5 – 10MM PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
Related Products
STRAIGHT CONNECTOR 12MM – 10MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range 0c to +60c.
STRAIGHT CONNECTOR 5/16
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
RIGID NYLON 22X18MM 3MTR PK5
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 10MM-8MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 3/16
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 1/2
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 3/8-5/16
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 8MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.