MALE SWIVEL STUD – RAUFOSS
| Type | Thread Size | Hex | Part No. | Pack Part No. | Pack Qty |
|---|---|---|---|---|---|
| Small | M12 x 1.5 | 18 | R10011200 | ||
| Small | M16 x 1.5 | 22 | R10011600 | ||
| Regular | M10 x 1 | 18 | R10021000 | RA772 | 1 |
| Regular | M12 x 1.5 | 18 | R10021200 | RA773 | 1 |
| Regular | M14 x 1.5 | 20 | R10021400 | RA774 | 1 |
| Regular | M16 x 1.5 | 22 | R10021600 | RA775 | 1 |
| Large | M16 x 1.5 | 22 | R10031600 | ||
| Regular | M22 x 1.5 | 28 | R10022200 | RA777 | 1 |
| Large | M22 x 1.5 | 28 | R10032200 | ||
| Small | 1/8NPT | 16 | R10013175 | ||
| Regular | 1/8NPT | 16 | R10023175 | ||
| Small | 1/4NPT | 16 | R10016350 | ||
| Regular | 1/4NPT | 18 | R10026350 | ||
| Regular | 3/8BSPT | 18 | R10019530 | ||
| Regular | 3/8NPT | 18 | R10029530 | ||
| Large | 3/8NPT | 22 | R10039530 | ||
| Regular | 1/2NPT | 22 | R10021270 | ||
| Large | 1/2NPT | 22 | R10031270 |
A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.
Related Products
STRAIGHT CONNECTOR 10MM-8MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
TEE CONNECTOR 4MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 5MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 3/8
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 3/8-5/16
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 10MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 6MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
STRAIGHT CONNECTOR 6MM-4MM
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.