IMI Norgren ISOLine Range
A short informational leaflet on the new IMI Norgren ISOLine range of cylinders and mountings.
IN – LINE FLOW REGULATOR 10MM
Please see our catalogue for a technical drawing of the valve set-up and positioning. Full range of valves, covering fuel shut off, non-return, pilot or spool or poppet type directional valves in 3/2, 5/2 or 5/3 set ups.
IN – LINE FLOW REGULATOR 6MM
Please see our catalogue for a technical drawing of the valve set-up and positioning. Full range of valves, covering fuel shut off, non-return, pilot or spool or poppet type directional valves in 3/2, 5/2 or 5/3 set ups.
IN LINE FILTER M22X1.5
A form of claw coupling, used as a hose connector and often for compressed air vehicle brakes. The port is at right angles to the axis of the hose.
INFLATOR TWIN CLIP ON OPEN END
A full range of tools for multiple uses and applications are available. Please see the Tooling section of the website or our catalogue.
INFLATOR TWIN HOLD ON OPEN END
A full range of tools for multiple uses and applications are available. Please see the Tooling section of the website or our catalogue.
INLINE COUPLING – RAUFOSS
| Type | Part No. |
|---|---|
| Small | R11000000 |
| Regular | R12000000 |
| Regular (With Bracket) | R12100000 |
A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.
INTEGRAL ELBOW 90 DEGREE – RAUFOSS
| Type | Tube | Part No. | Pack No. |
|---|---|---|---|
| Small | 6 x 1 | R03010600 | |
| Regular | 6 x 1 | R03020600 | RA741 |
| Small | 8 x 1 | R03010800 | |
| Regular | 8 x 1 | R03020800 | RA743 |
| Regular | 10 x 1 | R03021001 | |
| Regular | 10 x 1.25 | R03021002 | RA744 |
| Regular | 10 x 1.5 | R03021005 | |
| Regular | 12 x 1.5 | R03021200 | RA745 |
| Large | 15 x 1.5 | R03031500 | |
| Large | 16 x 2 | R03031600 |
A new generation of couplings, based on composite material composition in combination with leading coupling technology. The New Line system enables reduction in material cost, weight, article numbers and increases design flexibility. For a more detailed explanation of the system, please check the relevant section in our catalogue.
JOHN GUEST COLLET RELEASE TOOL
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
KUNIFER 1/2OD 25FT COIL
Manufactured to international standards BS EN 12449. Seamless tube, guaranteed for the life of a vehicle. The composition of 90% Copper & 10% Nickel makes the tube more reliable to flare and easier to manipulate when fitting.
KUNIFER 1/4OD 25FT COIL
Manufactured to international standards BS EN 12449. Seamless tube, guaranteed for the life of a vehicle. The composition of 90% Copper & 10% Nickel makes the tube more reliable to flare and easier to manipulate when fitting.
KUNIFER 10MMOD 25FT COIL
Manufactured to international standards BS EN 12449. Seamless tube, guaranteed for the life of a vehicle. The composition of 90% Copper & 10% Nickel makes the tube more reliable to flare and easier to manipulate when fitting.