ELBOW BULKHEAD M16X1.5 – 10X1.25MM PUSH-IN
WIRA Push-In fittings are designed to be quick and easy to use. After undergoing strenuous testing, they gained the German TUV approval for vehicle braking systems.
ELBOW BULKHEAD M18X1.5 – 12X1.5MM PUSH-IN
WIRA Push-In fittings are designed to be quick and easy to use. After undergoing strenuous testing, they gained the German TUV approval for vehicle braking systems.
ELBOW BULKHEAD M22X1.5 – 8MM
A full range of fittings and components that cover all metric air brake applications. Any parts listed with a T suffix denotes that it comes pre-fitted with a Thrust Ring and O-Ring.
ELBOW CONNECTOR – CAMOZZI
| Tube | Part No. | Pkt No. | Pkt Qty. |
|---|---|---|---|
| 10 x 1mm | CC6537 | CAM337 | 1 |
| 12 x 1.5mm | CC6539 | CAM339 | 1 |
Camozzi Push-In fittings have been designed for use in the braking system of commercial vehicles and are certified to TUV Standards.
Fittings are in compliance with the following standards: DIN 74324:1996, DIN EN ISO 9227:2006, DIN EN 60068-2-6:1996, GOST 4364-81 and GOST R 51190-162
ELBOW CONNECTOR 1/2
Brass Compression Fitting designed to be used in conjunction with copper, nylon or polythene tube.
ELBOW CONNECTOR 1/2
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range 0c to +60c.
ELBOW CONNECTOR 1/2
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range -20c to +70c.
ELBOW CONNECTOR 1/2 PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
ELBOW CONNECTOR 1/4
Brass Compression Fitting designed to be used in conjunction with copper, nylon or polythene tube.
ELBOW CONNECTOR 1/4
This range of plastic push in fittings provides a secure joint without the use of tools, making them quick and easy to fit. These can be used on nylon, plastic, calibrated copper or Bundy Tubes to carry air, water and other fluids except acids or fuel. Tube supports are recommended when using these fittings with nylon or plastic tubing. We do not recommend the use of these fittings on vehicle brake lines. Maximum working pressure is 10 Bar with a Temperature range 0c to +60c.
ELBOW CONNECTOR 1/4 PUSH-IN
Norgren FleetFit Push-In Fittings are a range of dedicated fittings designed to reduce the installation time to a minimum whilst ensuring a secure seal on vehicle air braking and suspension systems. Full TUV approval and conforms to the following standards: DOT FMUSSI06, SAE J1131 & DIN 74324.
ELBOW CONNECTOR 1/8
Brass Compression Fitting designed to be used in conjunction with copper, nylon or polythene tube.